Submersible dirty water pump - 1100W, 20000 l/h, stainless steel

Pump out large quantities of water with the VONROC submersible pump for dirty water
Powerful and reliable VONROC submersible pump for various pumping jobs. The water pump is suitable for pumping polluted and clean water from ponds, basements, swimming pools, garages, souterrains, cisterns and rain pits. Polluted water is water that is slightly turbid due to solid particles. This water pump is not suitable for water polluted with larger particles. For example, sewage. 

Key benefits of the submersible pump
•    Robust durable stainless-steel housing.
•    This powerful pump has a pumping capacity of 20000 litres dirty and clean water per hour and can handle dirt particles up to a maximum grain size of 25mm. This submersible pump can stand in water up to 7 metres deep. 
•    The pump is equipped with a float, which automatically switches the pump on and off at the desired level. 
•    The pump has a maximum capacity of 20m³/hour and maximum discharge height of 9 metres.
•    The pump leaves about 5cm of residual water behind.
•    The submersible pump requires little maintenance.

Tips for using the submersible pump
•    Check the function of the float switch at regular intervals (e.g., every 3 months) and clean the pump housing if necessary.
•    The recommended inner diameter of the hose is 32mm.
•    We recommend attaching a sturdy piece of rope or chain to the handle. In this way, you can easily lower the pump into the water. 
•    Do not lower the pump using the power cable.
•    This pump should not be used without interruption (e.g., as a circulation pump for a swimming pool or a pond) or for fixed installations (e.g., as a pump for a fountain)
•    When pumping polluted water from, for example, a pond, we recommend first placing a stone or something similar on the bottom and then positioning the pump on top.
•    Please note: these types of submersible pumps are intended for pumping large quantities of water under low pressure (for example to empty a basement or swimming pool). Because the pressure is low, these types of submersible pumps are not suitable for irrigation applications. The pressure is too low for a powerful jet from a sprinkler of nozzle. For these purposes irrigation pumps / garden pumps are suitable. 

Technical specifications 
•    Power: 1100W
•    Housing: stainless steel & impact- resistant plastic
•    Voltage: 230 VAC/50Hz
•    Max capacity: 20m³/hour
•    Max. pressure: 0.9 bar
•    Max. discharge height: 9m
•    Max. depth: 7m
•    Max. particle size of dirt: 25mm
•    Max. height of residual water: 5cm
•    Float switch: yes
•    Switch-on height of float switch: 50cm*
•    Switch-off height of float switch: 5cm*
•    Max. water temperature: 35 C
•    Degree of protection: IPX8 (protected against water penetration)
•    Built- in thermal motor protection: yes
•    Drain hose connection (press connection): 25mm, 32mm, G1” external thread
•    Direct connection: G1 ½ female thread
•    Cable length: 10m
•    Rubber cable: yes
•    Weight: 6 kg

*The switching height may vary depending on the position of the float switch. 

What’s in the environmentally friendly packaging?
The VONROC SP506AC submersible pump for slightly polluted and clean water comes in an environmentally friendly box without full colour print.

•    1x Submersible pump for slightly polluted and clean water – SP506AC
•    1x Hose connection